This high-limit thermostat (part number 318578506) is an essential safety component for ranges. It plays a crucial role in preventing potential damage by shutting off the oven if temperatures exceed safe levels. For safety, it is necessary to unplug the range or shut off the house circuit breaker before installation. Protective gloves should be worn to ensure personal safety.
Tappan Range Surface Burner Head (replaces 7316438200)
Part #316438200
In Stock
$47.03
11% OFFÂ Phone Price : $53.03
Qty
Wall Oven Safety Thermostat
Part #318578509
In Stock
$44.99
12% OFFÂ Phone Price : $50.99
Qty
Cooking Appliance Oven Temperature Sensor
Part #5304504897
In Stock
$28.72
17% OFFÂ Phone Price : $34.72
Qty
Range Thermal Cut-off, 110-degrees
Part #5304514198
In Stock
$59.25
Qty
Range Oven Control Board And Overlay (black) (replaces 5304516861)
Part #5304524332
In Stock
$177.09
6% OFFÂ Phone Price : $189.09
Qty
Range Lp Conversion Kit
Part #318565417
Replaced by #GRLP4
Manufacturer substitution
This part replaces 318565417. Substitute parts can look different from the original.
In Stock
$41.58
13% OFFÂ Phone Price : $47.58
Qty
Reviews
0 Reviews
Easy Fix for our issue
August 16, 2021|ahunter, West Jefferson, NC
Installation was simple and shipping was very fast.
Ease of InstallationEasy
Duration of Installation30 minutes - 1 hour
verified customer
Yes, I would recommend this to a friend
Was this review helpful?
Oven overheating.
July 17, 2020|Undisclosed, Portland Oregon
I worked with Benjamin at the parts department to determine which part we needed. He was spot on. I also asked him if it was difficult to install. He did say it was easy and that the instructions were on YouTube. Found them, installed the part & now have a working oven again at half the cost. Tell Benjamin he is AMAZING & thank him.
Ease of InstallationEasy
Duration of Installation30 minutes - 1 hour
verified customer
Yes, I would recommend this to a friend
Was this review helpful?
Chat Help
May 01, 2020|Melia, Undisclosed
With the help of others posting reviews - our replacement part purchase and install was a success at low cost and stress. The chat personnel were very helpful with sending the install videos. THANX
Ease of InstallationModerate
Duration of Installation1 - 2 hours
verified customer
Was this review helpful?
Installed on a Frigidare "built in" range.
September 13, 2018|Duckie, Selma, Alabama
Thermostat is mounted on top of the oven fan blower unit in space between top burners and oven. Removed the porcelain top below the burners just enough to get to the thermostat (four screws in front and two on back where top burner unit is attached to the stove). Once accessed, unit is easily replaced.
Ease of InstallationModerate
Duration of Installation30 minutes - 1 hour
verified customer
Was this review helpful?
Lots of disassembly to get to the part.
June 02, 2018|DavidG, Honolulu, HI
It's not hard, but it might take over an hour the first time to get to this safety fuse when you diagnose the problem. If you reassemble the stove so you can use the rangetop while you wait for the fuse to arrive, the job should take about 45 minutes, once you know where everything is. If you have the patience, you can save a lot of money doing it yourself, because the part is relatively inexpensive, but the labor for a technician to diagnose and repair the problem can be two hours. You've got to 1. Pull the whole stove out from the cabinet and disconnect the power cord. 2. Remove the control panel. 3. Disconnect the electronic control module. 4. Remove the console that holds the range knobs and disconnect those. 5. Remove the cover that holds the console in step 4. 6. Remove a bracket that supports that cover. 7. On my stove which has traditional spiral elements, I had to lift the rangetop and unscrew the metal cover that separates it from the stove, and then, I could disconnect and remove the fuse to test it for continuity, and replace it when it turned out to be bad.
Ease of InstallationDifficult
Duration of Installation1 - 2 hours
verified customer
Was this review helpful?
Bad location heat sensor
April 22, 2022|Scott, Missouri
It is located in a bad spot right under the big burner, keeps tripping. Had to replace it twice. It needs to be located away from the burners. I should get a free one due to bad design
Ease of InstallationDifficult
Duration of Installation1 - 2 hours
verified customer
Yes, I would recommend this to a friend
3 people thought this review was helpful.
Incorrect part/ didn't solve issue
December 25, 2019|Rental U, Undisclosed
There was not a part like this on our model even though the repair/salesman said it would fix our problem. THEN he sent a different part which also didn't repair it. We bought a new stove fromLowes since Sears has closed in our town.
Ease of InstallationVery Difficult
Duration of InstallationLess than 30 minutes
verified customer
Was this review helpful?
No applicable instruction
October 14, 2019|madwoman, adamsville, tn
No applicable instruction and unable to get C S to understand my type electric range...there are two versions, smooth surface and ring surface.
verified customer